Cloning Software-41S
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
- Rohan
- Registered User
- Posts: 359
- Joined: Tue Dec 04, 2007 9:50 am
- Location: cambooya
Cloning Software-41S
Hi guys this is a link to the icom 41-s cloning software.
Thank Brisbanescan for the host site.
CS41S
Thank Brisbanescan for the host site.
CS41S
Last edited by Phil on Tue Sep 07, 2010 6:19 pm, edited 2 times in total.
Reason: Fix of html destination and code
Reason: Fix of html destination and code
Rohan Greer
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
- youngn
- Forum Manager
- Posts: 498
- Joined: Sun Aug 24, 2008 11:55 am
- Location: Rochedale South
- Phil
- Administrator
- Posts: 1517
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Cloning Software-41S
just having some issues with the site. the files section is now available again so all links should be working.
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
- youngn
- Forum Manager
- Posts: 498
- Joined: Sun Aug 24, 2008 11:55 am
- Location: Rochedale South
-
- Registered User
- Posts: 4
- Joined: Mon Sep 12, 2011 6:43 pm
Re: Cloning Software-41S
Hi All
Does this software require a product ID
Cheers
Brrob
Does this software require a product ID
Cheers
Brrob
- Rohan
- Registered User
- Posts: 359
- Joined: Tue Dec 04, 2007 9:50 am
- Location: cambooya
Re: Cloning Software-41S
the product id should be in the setup file
Rohan Greer
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
-
- Registered User
- Posts: 4
- Joined: Mon Sep 12, 2011 6:43 pm
Re: Cloning Software-41S
Hi Thanks for that, i have tried it and says it is invalid, any other ideas would be very appriciated.Rohan wrote:the product id should be in the setup file
- Phil
- Administrator
- Posts: 1517
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Cloning Software-41S
Rohan,
were you the one who sent me this as i thought i put the id in. will have to find the id and put it in as it is not in there
were you the one who sent me this as i thought i put the id in. will have to find the id and put it in as it is not in there
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
- Rohan
- Registered User
- Posts: 359
- Joined: Tue Dec 04, 2007 9:50 am
- Location: cambooya
Re: Cloning Software-41S
Yeah i had it on my old computer but it blew up i thought it was in the setup file or the read me file havent reinstaled it so cant remember. but i do belive you found the product id for me to install it the first time phil
Rohan Greer
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
-
- Registered User
- Posts: 4
- Joined: Mon Sep 12, 2011 6:43 pm
Re: Cloning Software-41S
Hey Guys
Here is the ID Code,
292811-00XXXX
Repalce the XXXX with what ever numbers (1-9 not 0) you feel like.
I got it from someone on another forum, it works. Would any of you have instructions on how to use and program the IC-41S.
Here is the ID Code,
292811-00XXXX
Repalce the XXXX with what ever numbers (1-9 not 0) you feel like.
I got it from someone on another forum, it works. Would any of you have instructions on how to use and program the IC-41S.
-
- Newly Registered Users
- Posts: 2
- Joined: Sun Apr 07, 2013 2:13 am
Re: Cloning Software-41S
The revision 1.0 software is no good for the 80 ch. when you program the radio with it the channels go in as wide not narrow . so when you talk on 80 it interferes with 40, 39 so someone on them would know some one is on channel 80 you need revision 1.2 for the 80 ch narrow... does anyone have the revision 1.2
-
- Registered User
- Posts: 5
- Joined: Mon Sep 16, 2013 6:52 pm
Re: Cloning Software-41S
i have been trying to play with the programing of the pc software so far i have only been able to work out how to give W wideband the same value as N narrow band it s on line 847 of EX2928D.OVL have a fiddle if u know what ur doing ... let me kno what u come up with