Hi,
Anyone have experience with a ICOM IC 41W ??
I have had one for a couple of years simply using it on one channel, and its been fine.
I am going on a trip and thought i would set up the scanning for channels 40, 20 and 18.
So i selected Group Scan, selected those channels and Tagged them, then pressed scan.
The Radio scans all the channels 1 -40 , whether i have the scan set as Group or Priority, and scans channels 1 - 80 if i have the scan set as open... The "S" indicator flashes on and Off as it scans the channels (Showing S for a tagged Channel).
I am doing anything obviously wrong? I thought it should just scan the Tagged Channels and skip the un-tagged ones?
Regards
Timp
ICOM IC41W Scanning Non Tagged Channels
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Feb 21, 2014 5:39 pm
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Feb 21, 2014 5:39 pm
Re: ICOM IC41W Scanning Non Tagged Channels
Still no luck with a solution to this?
Am I the only one using this radio/ with this problem?
Regards
The Timp
Am I the only one using this radio/ with this problem?
Regards
The Timp
- youngn
- Forum Manager
- Posts: 498
- Joined: Sun Aug 24, 2008 11:55 am
- Location: Rochedale South
Re: ICOM IC41W Scanning Non Tagged Channels
G'day mate,thetimp wrote:Still no luck with a solution to this?
Am I the only one using this radio/ with this problem?
Regards
The Timp
Unfortunately I don't have much experience with the 41S/W,
I suspect it may have something to do with the PC programming perhaps...
Have you had it hooked up with the software on a computer?
Cheers
"YOUNGN"
- chrisco
- Registered User
- Posts: 48
- Joined: Mon Dec 31, 2012 1:00 pm
Re: ICOM IC41W Scanning Non Tagged Channels
I have a a icom ic41s I will have a look next time a have a spare moment.
Sent from my GT-I9305T using Tapatalk
Sent from my GT-I9305T using Tapatalk
-
- Registered User
- Posts: 8
- Joined: Sat Aug 30, 2014 9:38 am
Re: ICOM IC41W Scanning Non Tagged Channels
r u still having this problem
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Feb 21, 2014 5:39 pm
Re: ICOM IC41W Scanning Non Tagged Channels
Hi All,
I took the radio back to the dealer, and they gave it a software upgrade to correct the issue.
First one they had seen like that.
regards
The Timp
I took the radio back to the dealer, and they gave it a software upgrade to correct the issue.
First one they had seen like that.
regards
The Timp
- chrisco
- Registered User
- Posts: 48
- Joined: Mon Dec 31, 2012 1:00 pm
Re: ICOM IC41W Scanning Non Tagged Channels
Did you get it sorted...thetimp wrote:Hi All,
I took the radio back to the dealer, and they gave it a software upgrade to correct the issue.
First one they had seen like that.
regards
The Timp