Page 1 of 1
SES Dispatch/ RMR network site
Posted: Wed Feb 20, 2019 6:26 pm
by Vkctomelb
Hi there I have programmed my UBCD396XT with the central north south east and west dispatch ID”s for SES
I was wondering if ses can be picked up off a RMR Network SITE
From outter Melbourne northern suburbs and don’t pick up 420.0125 CBD from where I am.
If can comment below the the sites would be appreciated thanks
Re: SES Dispatch/ RMR network site
Posted: Wed Feb 20, 2019 7:12 pm
by X-Firey
VICSES can be received on both the MMR and RMR however VICSES operate on P25 Phase 2.
Unfortunately the UBCD396XT is not Phase 2 capable.
You require something like the UBCD325P2-AU, 436PT, 463HP or TRX-1
Re: SES Dispatch/ RMR network site
Posted: Wed Feb 20, 2019 9:37 pm
by Vkctomelb
X-Firey wrote:VICSES can be received on both the MMR and RMR however VICSES operate on P25 Phase 2.
Unfortunately the UBCD396XT is not Phase 2 capable.
You require something like the UBCD325P2-AU, 436PT, 463HP or TRX-1
Okay thanks however I did hear SES on 420.0125 MMR this afternoon at around 1Pm TG: 32XXX cannot remember the rest of digits. Maybe various talk groups are on phase 2 ?
Re: SES Dispatch/ RMR network site
Posted: Sun Feb 24, 2019 8:00 pm
by Xplorer
Vkctomelb wrote:X-Firey wrote:VICSES can be received on both the MMR and RMR however VICSES operate on P25 Phase 2.
Unfortunately the UBCD396XT is not Phase 2 capable.
You require something like the UBCD325P2-AU, 436PT, 463HP or TRX-1
Okay thanks however I did hear SES on 420.0125 MMR this afternoon at around 1Pm TG: 32XXX cannot remember the rest of digits. Maybe various talk groups are on phase 2 ?
From above, SES are Phase II on all TG's on both MMR and RMR.
All dispatch and standard operational communications is via above.
The 32xxx is allocated to state command TG's and as above, is Phase II throughout VIC.
What you heard could have been the testing of patching (inter, intra, multi or super groups).